Flowmeters

The flowmeter is an instantaneous flow measurement device usd to regulate OXYGEN flow in medical treatment oxygen flowmeter with humidifier bottle can be attached to gas specific probes according to your requirements and only attached to the corresponding medical gas outlet.
Flow Rate : 0-15 L/min

Connection	Type	Gas	Model No
BS	Wall Type	Oxygen	BR-FL-BS
DIN	Wall Type	Oxygen	BR-FL-DIN
AFNOR	Wall Type	Oxygen	BR-FL-NF

Humidifier sterilizable Bubble type humidifier diffuser that increases the level of moisture and reduces noise. Ideal for use in areas which require a moderate relative humidity .sterilizable:by autoclave at 134 C size 200 ml

Flowmeters

Oxygen Therapy Device

They are equipment used to regulate and humidify the pressure coming from high pressure oxygen cylinders. Oxygen therapy devices are specially designed for easy use

• Chrome plated body

• Maximum gas supply: 230 bar

• Regulator Output Pressure: 4-5 bar

• Flow rate: 0 – 15 L/min

• Display Range: 0 – 315 bar

• Sterilization Method: 134 °C

Oxygen Therapy Device

Vacuum Regulator

• On / Off lever for instant vacuum cut • Autoclavable safety jar to avoid fluid leakage into central vacuum line • Easy to read vacuum gauge • Flow adjustment knob

Connection	Gas Type	Model No
Without Adaptor	Vacuum	BR-VR
BS	Vacuum	BR-VR-BS
DIN	Vacuum	BR-VR-DIN
AFNOR	Vacuum	BR-VR-NF

Vacuum Regulator

2L VACUUM JAR

Vacuum jar is used for col-lecting liquids while aspiration from patient. It prevents leaking dirt into vacuum system. 121° C

2L VACUUM JAR

Venturi Type Vacuum Regulator

Designed to provide vacuum by using compressed air or oxygen source • Easy adjustment of vacuum pressure • Suction trap removing pollution caused by overflow • Chrome coated brass trunk • Available in BS, DIN, AFNOR, DISS standards • Max Suction Flow: 25L/min at-775 mbar • Gas Consumption at max Scution : 60L/min

Gas Type	Medical Air
Without Adaptor	BR-VEN
BS	BR-VEN-BS
DIN	BR-VEN-DIN
AFNOR	BR-VEN-NF
DIS	BR-VEN-DIS

Venturi Type Vacuum Regulator

Probes

Probes are produced according to international standards by usin a special labelling for gases. They are used to supply necessary gases from terminal units to the patient or medical equipments via hose connections or by direct connection to the equipment.

• Manufactured according to BS, DIN ,AFNOR & DIS standard

• Special connections for O2, N2O, AIR 4 and AIR 7

• Special labeling for each gas type

• Safe hose connection

• Made of chrome plated brass material

	Oxygen	Vacuum	Air 4	Air 7	N2O	CO2
BS	BR-PRO-BS	BR-PRV-BS	BR-PRH4-BS	BR-PRH7-BS	BR-PRN2-BS	BR-PRC2-BS
DIN	BR-PRO-DIN	BR-PRV-DIN	BR-PRH4-DIN	BR-PRH7-DIN	BR-PRN2-DIN	BR-PRC2-DIN
AFNOR	BR-PRO-NF	BR-PRV-NF	BR-PRH4-NF	BR-PRH7-NF	BR-PRN2-NF	BR-PRC2-NF

Dual outlet probe AFNOR STANDARD

Probes

Probe With Manometre

• Chrome plated brass trunk

• Flow adjustment knob

• Pressure or vacuum gauge

• Gas specific connection port

• Suitable outlet for hose connection

Gas Type	Oxygen	Vacuum	Nitrous Oxide	Air 4	Air 7
Without Adaptor	BR-PO	BR-PV	BR-PN	BR-PM4	BR-PM7
BS	BR-PO-BS	BR-PV-BS	BR-PN-BS	BR-PM4-BS	BR-PM7-BS
DIN	BR-PO-DIN	BR-PV-DIN	BR-PN-DIN	BR-PM4-DIN	BR-PM7-DIN
AFNOR	BR-PO-NF	BR-PV-NF	BR-PN-NF	BR-PM4-NF	BR-PM7-NF
DIS	BR-PO-DIS	BR-PV-DIS	BR-PN-DIS	BR-PM4-DIS	BR-PM7-DIS

Probe With Manometre

MEDICAL GAS HOSE

Medical gas Hose use with Pendants,

Ventilators,

Anesthesia Machines and Rail Accessories 20 bar BR-HX X = O2

BR-HX X = O2 , N2O, AIR,CO2,VACUUM